MAX7219 Dot Matrix Module Microcontroller LED Module Display Module MAX7219 DIY Kit
165
Direct purchase from the factory 
Harkasqa rantiy
Qispichiy regalo
Apachiy rimanakuy
Kutichiy rimanakuyQispichiy regalo
Roymallman haykuy, allin regalo rantiy qusqayki. Qusqaykimanta agradeseq. Regalokunata rantispayki, qispichiy regalota qusaq. Maskay munay regalokunata, rantiy qispichiy regalota chaskiy.Apachiy rimanakuy
2 punchawkunapi apachimuyki. Sábado, domingo, fiestakunapiqa 2 punchaw astawan.5-7 punchawkunapi chaskiyki (lunes-viernes).Llapa suyukunaman apachimuyki, huk suyukunapi astawan tiempo.1. Kutichiy & Cambio
Solo roymall.commanta rantikunata kutichiy atikun. Mana utilizasqa, original paquete.3-5 punchawkunapi devolución.Kikin regalokuna mana kutichiy atikunchu.Whatsapp: +86193598494712.Devolución
100% devolución original pago.Apachiy coste mana devolución.Whatsapp: +8619359849471
Description:
· A single module can drive an 8*8 common negative lattice
· Module operating voltage: 5V
· Module size: 3.2 cm long, 3.2 cm wide and 1.5 cm high
· With 4 fixed screw holes and 3 mm diameter, it can be fixed with M3 copper column.
· Modules with input and output interfaces support multiple modules cascade
Wiring instructions:
The left side of the module is the input port, and the right side is the output port.
When controlling a single module, you only need to connect the input port to the CPU.
When multiple modules are cascaded, the input end of the first module connects to the CPU, the output end connects to the input end of the second module, the output end of the second module connects to the input end of the third module, and so on.
Take 51 single chip computer as an example:
· VCC 5V
· GND GND
· DIN_P20
· CS_P21
· CLK_P22
Package included:
1 x MAX7219 Dot Matrix Module DIY kit
· A single module can drive an 8*8 common negative lattice
· Module operating voltage: 5V
· Module size: 3.2 cm long, 3.2 cm wide and 1.5 cm high
· With 4 fixed screw holes and 3 mm diameter, it can be fixed with M3 copper column.
· Modules with input and output interfaces support multiple modules cascade
Wiring instructions:
The left side of the module is the input port, and the right side is the output port.
When controlling a single module, you only need to connect the input port to the CPU.
When multiple modules are cascaded, the input end of the first module connects to the CPU, the output end connects to the input end of the second module, the output end of the second module connects to the input end of the third module, and so on.
Take 51 single chip computer as an example:
· VCC 5V
· GND GND
· DIN_P20
· CS_P21
· CLK_P22
Package included:
1 x MAX7219 Dot Matrix Module DIY kit
Products related to this item
Loading related products...
❮
❯
Videos for similar product
Loading product videos...
❮
❯
Electronics Ranking
n
n
n
n
n
n
n
n
n
n
n
n
n
n
